DoseRAE 2 is a compact, direct-reading and alarming electronic
personal radiation detector.
It uses a diode and a scintillation crystal
to detect X- and gamma radiation, and provides real-time monitoring
of personal dose and dose rate.
The real-time radiation dose rate
monitoring allows immediate reaction in case of radiation occurrences
and thus reduces the radiation exposure.
By measuring dose
equivalent and dose equivalent rate, this detector provides the
functions of a dosimeter too.
It also measures radiation exposure and
exposure rate, which is appropriate for controlling the exposure of
emergency responders to photon radiation.
Dosimeter Meets Detector - Contains two separate sensors,
CsI/photodiode and PIN diode.
The energy-compensated PIN diode
provides high-dose-rate range
coverage and accurate dose measurements,
while the CsI (Cesium
Iodide) scintillator provides fast
response to low-level radiation.
Datalogging and Analysis -DoseRAE 2 offers continuous
datalogging with a large, 3,000-point
datalog capacity. With associated
software, the datalog can be downloaded
via USB to a computer. This
software is used for data display,
analysis and record management.
Alarm Types - Integrated loud audible, bright LEDs,
and vibration alarms.
Total Dose Data - Accurately accumulates real-time
National Standard Compliance - DoseRAE 2 was designed in
compliance with IEEE ANSI N42.20
standard, and the performance
was tested at Oak Ridge National
Laboratory, Tennessee, U.S.A.
Stand-alone electronic dosimeter with
Multiple units with reader and software
can be used as a dosimetry system
Continuous digital dose rate readout in
rem/h, Sv/h and R/h
Continuously accumulated total dose
readout in rem, Sv and R
Prominent visible, audible, and vibration
Long calibration life
Two operation keys, simple intuitive
Nuclear power plants
Hazardous Material Response Teams