Home › Gas Analysers › Boiler/Flue › Eurotron EcoLine 4000
Eurotron EcoLine 4000 Handheld Industrial Combustion & Emission Analyser
This product is now obsolete and has been replaced by the Rasi 700.
Portable and Rugged Multifunction Unit
for Industrial Service & Maintenance
The NEW handheld EcoLine 4000
provides the latest tecnology in flue
gas analysis. One instruments with
Up to 4 gas sensors;
CO sensor with manual or
Built-in impact printer;
Water, air, surface temperature
Searching for presence and
location of gas leaks;
Differential pressure input for
draft and gas velocity
Operator safety with ambient CO
Ambient temperature and relative
Easy replaceable gas sensors
EcoLine 4000 uses long life, low
maintenance sensors. Alarm levels
with audible buzzer on gases
CO sensor protection - An automatic device can exlude the
CO sensor in presence of high Carbon
Standard Report of Calibration - Every instruments are factory
calibrated and certified against
Eurotron Standard to ensure
traceability, and shipped with a Report
Rechargeable battery operations - Ni-MH rechargeable batteries provide
longer field use. Flue gas analyser
and internal printer are powered by
the same internal batteries.
Keyboard & Display - Text, menu, and keyboard available in
most common languages (not icons)
for simple and intuitive operations.
Engineering units are selectable by
keyboard. The large backlight graphic
LCD can display 3, 6 or 12 values per
page (ZOOM function) or with
Multi Fuel selection - EcoLine 4000 provides up to 10 fuels
for calculating combustion values.
Most used fuels for your country are
pre-loaded from factory. Others fuels
can be added using GasConfig PC software.
Built-in impact printer - The EcoLine 4000 can include an
internal printer. It uses a low cost
common roll of paper. Certainly more
readable, long time and heat resistant
than the thermal printout on chemical
Smoke index - Smoke index measurement is
performed by using the optional
external hand pump. The results can
be stored in the internal memory and
printed on the report.
Gas sampling probe - Flue gas sampling probes, with
different lengths and shapes, are
available to match each specific
requirement. The sampling probe is
connected to the instrument with a
single or dual hose through a water
trap and a suspended particle line
Proprietary design trap - Patent pending to inhibit water into the
instrument. External, to prevent risk of
instrument damage. Large water tank
capacity for condensation boiler. Small
rubber cup for easy water purge. Long
life paper filter.
Combustion air temperature probe - A remote Pt100 probe is available for
remote combustion air temperature
measurement. This probe is strongly
recommended mainly in forced air
boiler to obtain an accurate efficiency
CO ambient monitoring - An external optional probe is available
for continuous surveillance of the
ambient and operator safety. Both
acoustic and visual alarm are
Gas leak sniffer - An external probe is available to
locate the position of a gas leak. This
probe has a flexible stainless steel shaft to reach difficult locations.
T+RH ambient monitoring - An external probe is available for
temperature and relative humidity of the
ambient for comfort index computation.
Ionization flame tester - Checks the ionization current in flame
Gas velocity - Measure the gas speed using one Pitot
tube connected to the differential
pressure ports. Different tube lenghts are
available for different stack diameters.
EcoLine 4000 calculate the gas velocity
cosidering the gas density parameter.
Industrial probe & compact cooler unit - A special sampling probe is available for
industrial high temperature applications.
This probe can be used connected to an
external gas conditioning unit (see
related bulletins). This compact unit cool
the gas sample to dry it. The cooler unit
is strongly recommended for SO2 and NO2 long terms measurements.
Flash memory - The flash memory allows the instrument
to be configured by updating the
EcoLine firmware for any future
legislation requirement or product
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
We are open Monday to Friday, from 9.30 - 5.30 GMT.
|Keison Global trading as:
Keison Products, VoIPon Solutions & 4Gon