Single channel, 0-1500W/m-2, model dependent.
Constant sampling technique; misses very little data
Complete with Electrosoft analysis software
Sealed to IP65/NEMA 12/4
The SR-1R is designed to allow users to monitor and record Solar Irradiance
over a prolonged period. The SR-1R is widely used for site surveys, either for
proposed Solar Energy installations or to assess existing systems.
Setting up the Electrocorder is easy, suitable for non-technical users. Using
the supplied Windows software, Electrosoft; input the location details for
the logging and choose the logging period. Electrosoft will print the necessary
dispatch / return documentation including user instructions. All data
is included in a database of dispatches and returns, allowing you to track
location of multiple loggers.
Why is the Electrocorder better than other similarly priced competitors?
The Electrocorder range use a constant sampling technique, unlike the
single reading of competitors.
When the loggers start to record, they sample every channel 16 times every
20ms. At the end of each averaging period, 3 quantities are saved for each
channel, the True RMS average, the Maximum, which is the highest value
during the period and the Minimum. This means that it will record all the
peaks and troughs which are one 20ms or longer.
Electrocorder will start recording when the green start button is pressed
and stop recording when the memory is full. Recording is shown by a flashing
green light and completion by a red light.
The solar irradiance levels are stored with dates and times. With the back-up
battery, the Electrocorder can continue to record for about a week on battery
power alone and indefinitely with the 12V PSU.
Electrocorder Range Presentation
The stored data is uploaded to a PC via the supplied RS232 cable. Using
Electrosoft, the recorded solar irradiance levels, dates & times can be
viewed in both tabular and graphical form, exported to a spreadsheet or
saved to file.
Graphs can be printed showing the recorded levels and the allowable tolerance
bands. Electrosoft also provides an internal database which effectively
manages the distribution of multiple units.
This model is specifically designed to monitor one solar irradiance channel.
Allowing you to monitor the irradiance at a given site. There are many models
of Electrocorder, to suit many logging situations and user’s requirements.
Enables users to conduct site or installation surveys.
Records Solar Irradiance up to 1500W/m-2.
One input channel.
Records minimum, average and maximum solar Irradiance.
Data stored in non-volatile memory.
Free software, Electrosoft.
Recorded data is uploaded to a PC for analysis
Memory capacity of 32,000 (10 bit, TRMS) values, up to 300
days continuous recording.
Selectable averaging period to suit each situation, accurate to
±5% of reading.
Kit includes Logger, Electrosoft, Serial Lead, Pyranometer &
Plug in mains 12Vdc PSU.
SR-1R-IP65 & SR-1R-IP65-KIT