Electrocorder EC-3CT Single & Three Phase Current Logger
Three phase; 30Aac, 60Aac or 300Aac (300A max input)
Constant Sampling technique, misses very little data
Complete with Electrosoft energy analysis software
Available as IP65/NEMA 12/4
The Electrocorder range is designed to allow users to cost effectively
monitor single and three phase loads. This product will allow single and 3
phase loading and/or balancing problems to be highlighted quickly as well
as assessment of energy usage over time.
Setting up the Electrocorder EC-3CT is easy, suitable for semi-technical
staff. Using the supplied (free) Windows software, Electrosoft; the locationís
details are input to the unitís memory and stored. Electrosoft can then print
documentation allowing users to record and/or pass on delivery instructions
to colleagues. All data is also stored in a database of dispatches and returns,
which tracks the whereabouts of all loggers.
Why is the Electrocorder better than other similarly priced competitors?
The Electrocorder range use a constant sampling technique, unlike the
single reading of competitors. When the loggers start to record, they sample
every channel 16 times per cycle, a cycle is 16ms at 60Hz and 20ms at
50Hz. At the end of each averaging period, 3 quantities are saved for each
channel, the True RMS average, the Max, which is the highest cycle value
during the period and the Min, lowest cycle value. This means that it will
record all the peaks and troughs which are one cycle or longer.
There are many models of Electrocorder, to suit many logging situations and
Memory modes available: The Electrocorder can be set to start recording
when it is connected and the Ďstartí button pressed and stop when the
memory is full.
When recording the Electrocorder will store the average current over the period
chosen (1 sec to 60 min), it will also record the highest (max) & lowest
(min) cycle values during that period.
The current levels are stored with dates and times. With the back-up battery,
the Electrocorder can continue to record for 6 months. An external 12Vdc
PSU input is available, to allow for prolonged logging without batteries. The
stored data is uploaded to a PC via the supplied USB cable. Using Electrosoft,
the recorded current levels, dates & times can be viewed in both tabular
and graphical form, exported to a spreadsheet or saved to file.
Graphs can be printed showing the recorded levels and the allowable tolerance
bands. These results may then be discussed with the customer. Electrosoft
also provides an internal database which effectively manages the
distribution of multiple units.
On the logger, recording is signified by a flashing green light. A steady red
light advises users that the unit has completed recording. This model is
specifically designed to accurately monitor one, two or three current channels.
Allowing you to monitor the loading and energy consumption of the
Enables current or load problems to be highlighted
Allows users to accurately record load currents up
Three current input channels (A1, A2, & A3).
Records IAvg, IMax & IMin on all 3 channels. Data stored in nonvolatile
Recorded data is uploaded to a PC for analysis
Memory capacity of 32,000 (true RMS) values per channel
(10bit), up to 300 days continuous recording.
Free software, Electrosoft.
Kit includes Logger, Carry Case, Electrosoft software, Three
CTs, USB lead, 12Vdc Power Supply, Batteries.
Selectable averaging period to suit each situation,
accurate to under 1% of range.
Order code 300Amp model:- EC-3CT-300-5H-KIT (50Hz) or EC-3CT-300-6H-KIT (60Hz).
Order code 60Amp model:- EC-3CT-60-5H-KIT (50Hz) or EC-3CT-60-6H-KIT (60Hz).
Part numbers in this range include EC-3CT-30-6H-IP43-KIT, EC-3CT-60-6H-IP43-KIT, EC-3CT-300-6H-IP43-KIT, EC-3CT-30-5H-IP43-KIT, EC-3CT-60-5H-IP43-KIT, EC-3CT-300-5H-IP43-KIT, EC-3CT-300-5H-IP43-KIT (50Hz), EC-3CT-300-6H-IP43-KIT (60Hz), EC-3CT-60-5H-IP43-KIT (50Hz) and EC-3CT-60-6H-IP43-KIT (60Hz).
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
We are open Monday to Friday, from 9.30 - 5.30 GMT.
Keison Global trading as: Keison Products, VoIPon Solutions & 4Gon
We accept the following currencies: GBP (Pound Sterling), EUR (Euros) and USD (United States Dollars).
Worldwide shipping to: UK, Ireland, Germany, Italy, China, Norway, Russia, Poland, Indonesia, India, Pakistan, Azerbaijan, Malaysia, Philippines, Kazakhstan, Nigeria, Qatar, Taiwan, Vietnam, Hong Kong, Saudi Arabia, Singapore, Turkey, UAE and many more.