Two Phase 300Vac, 2 channels, Live to Neutral & Earth/Ground to Neutral
Constant Sampling technique; misses very little data
Complete with Electrosoft energy analysis software
Available as IP65/NEMA 12/4
The Electrocorder range is designed to allow electrical distribution
companies to cost effectively monitor their customers’ supply, the
Electrocorder enables real voltage problems to be highlighted quickly
for further investigation using traditional recorders.
Setting up the Electrocorder is easy, suitable for non-technical staff.
Using the supplied Windows software, Electrosoft; the customer’s
name and address are input to the unit’s memory and stored.
The Electrocorder is designed such that it may be mailed to the
customer in the reusable mailing case. Electrosoft will also print the
necessary dispatch / return documentation including customer
instructions. All data is included in a database of dispatches and
Why is the Electrocorder better than other similarly priced competitors? The
Electrocorder range use a constant sampling technique, unlike the single
reading of competitors. When the loggers start to record, they sample every
channel 16 times per cycle, a cycle is 16ms at 60Hz and 20ms t 50Hz. At
the end of each averaging period, 3 quantities are saved for each channel,
the True RMS average, the Max, which is the highest cycle value during the
period and the Min, lowest cycle value. This means that it will record all the
peaks and troughs which are one cycle or longer.
The Electrocorder conforms to the European recording standard
EN50160: 1994 - “Voltage characteristics of electricity supplied
by public distribution systems.”
When recording the Electrocorder will store the average voltage over
the period chosen (1 sec to 60 min), it will also record the highest
(max) & lowest (min) cycle values during that period.
Electrocorder Range Presentation
The EC-2V can record two channels - Live (Hot) to Neutral and Neutral
to Earth (Ground). Allowing better diagnosis of poor or lost neutral
The voltage levels are stored with dates and times. With the back up
battery, the EC-2V can record for up to 8 months during power cuts.
When the unit has been returned to the power company, the stored data
is uploaded to a PC via the supplied RS-232 cable. Using Electrosoft,
the recorded voltage levels, dates & times can be viewed in both tabular
and graphical form, exported to a spreadsheet or saved to file.
Graphs can be printed showing the recorded levels and the allowable
tolerance bands. These results may then be discussed with the
customer. Electrosoft also provides an internal database.
React to domestic voltage complaints within 24 hours -
Mail or deliver it to your customer and free-up
Store Electrocorders in your field engineer’s vehicles, radio
through complaints for instant delivery.
Database in software ensures effective management of
Kit includes Logger, Carry Case, Electrosoft, & Serial Lead.
Records up to 226 days of average voltage, max & min with
date & time.
Miniature logger enables real voltage problems to be high
lighted quickly for further investigation.
Free-up expensive inventory which would otherwise be used for