Home › Personal Safety › Safety Wear › Drager Workmaster
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Even under extreme
WorkMaster will meet
your requirements by
way of comprehensive
Apart from exposure to chemicals, the
protective suit is often adversely affected
by one or more of conditions such
as tensile stress, abrasion, exposure to
heat etc. during work within chemical
tanks, at pipeline systems or any other
narrow rooms. Any of the above mentioned
conditions may result in the
protective suit being restricted in its
If during such activities a loss of the
protective effects was experienced
the users health could be in severe
The chemical protective suit
WorkMaster pro is protecting you
throughout due to the fact that those
are exactly the situations that
WorkMaster pro has been developed
The newly developed material called
Himex makes this use possible in such
conditions. It is nearly impossible to
find such a combination of resistance
to both chemical exposure and mechanical
stresses. Some suits tear if they
catch on a sharp edge which could
result in loss of protection.
Strong mechanical stresses such as
climbing under trucks or between
chemical tanks can also cause tearing.
In both situations Himex will remain
intact thus remaining its chemical protection.
You know the phenomenon of deflagrations
suddenly occurring at work.
Even now Himex is protecting the
Donning of the suit is made easier by
the zip fastener ending at the shoulder.
The sunken zipper (being provided
with teeth made of stainless steel and
a Himex covering flap) is to be closed
from top to bottom, thus ensuring it is
If you examine WorkMaster pros
manufacture and accessories you will
recognise that WorkMaster pro has
been purpose built for such arduous
work situations. In order to guarantee
the resistance of the fabric to hard
working conditions all seams are
double stitched and are sealed chemically
tight by fabric strips overlaid on
both the inside and outside.
The steel toe caps provided in the
interchangeable safety boots prevent
foot injuries caused by heavy objects
falling on them.
Viton gloves, resistant to chemicals,
may be replaced within a few minutes
and without any additional tools. Nevertheless
this modern glove connection
is capable of withstanding more
than 30 kg of tensile force without
loosening. While maintaining a high
level of robustness the repair and service
features as well as economic
efficiency are in no way diminished. In
fact after only a short cleaning an disinfection
of the suit the WorkMaster
pro is ready for use again.
WorkMaster is made of the newly
developed material called Umex which
is ideally suited for use in working
conditions where the hazard is known
or subject to control such as acid, lye
or chloric gas. This protective suit
guarantees high wearer comfort and
sufficient chemical protection. The
bright red colour will ensure visibility
even in dark or vapour saturated environments.
WorkMaster and WorkMaster pro are
the latest state of the art in chemical
Due to a wide range of modifications
available both versions are suitable for
Back To Last Page
We are open Monday to Friday, from 9.30 - 5.30 GMT.
|Keison Global. trading as:
Keison Products, VoIPon Solutions & 4Gon