Home › Gas Analysers › Safety › Drager Flame 2300
Drager Flame 2300
The Drager Flame 2300 is an explosion proof combined UVIR
flame detector used for the detection of hydrocarbon based fires.
The detector provides flexibility with its numerous output modes,
and advanced design features ensure reliability in the detection
of fires whilst at the same time providing excellent immunity to
potential false alarm sources.
Simple installation and commissioning
Installation is simple! The detector is easily
installed with a stainless steel mounting
bracket; this can be rotated to ensure
optimum positioning of the detector in relation
to the potential fire source. Angular
markings allow the positioning angles of
the detector to be recorded for future
As well as a 4 to 20 mA output and 3 relays,
an optional RS 485 output is also
available, which can be multi-dropped to a
central location. This provides a number
of options for detector monitoring and the
triggering of the necessary control action
upon the detection of a fire.
Automatic and manual optics checks
Au to matic checks of the detector electronics
and optics ensure no fault goes undetected.
Additionally the test can be triggered
manually at anytime.
False alarm immunity
The Drager Flame 2300 provides the highest
level of false alarm immunity. This is
because the detector requires both IR
and UV sensors to alarm before the detector
will itself output an alarm condition
and such action ensures that false alarms
are all but non-existent.
Isolated 4 to 20 mA as standard
Complete flexibility enables the detector
to be operated from a separate power supply (as a 4 wire device) or as a 3 wire
device where there is no requirement for
an isolated output.
Easily visible status LED
A tri-coloured LED which is visible at the
front of the detector provides a simple status
indication to personnel in close proximity
to the detector. Green indicates normal
operation; yellow indicates a fault and
red indicates the presence of radiation.
The Drager Flame 2300 can be used
worldwide with the following approvals:
ATEX, IECEx, FM and CSA.
Dräger Flame 2300, Al housing, M20 entries 2350424
Dräger Flame 2300, Al housing, M25 entries 2350430
Dräger Flame 2300, Al housing, 1/2” NPT entries 2350436
Dräger Flame 2300, Al housing, 3/4” NPT entries 2350442
Dräger Flame 2300, SS housing, M20 entries 2350427
Dräger Flame 2300, SS housing, M25 entries 2350433
Dräger Flame 2300, SS housing, 1/2” NPT entries 2350439
Dräger Flame 2300, SS housing, 3/4” NPT entries 2350445
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
We are open Monday to Friday, from 9.30 - 5.30 GMT.
|Keison Global trading as:
Keison Products, VoIPon Solutions & 4Gon