Home › Gas Analysers › Safety › Drager Flame 1700
Drager Flame 1700
The Drager Flame 1700 is an UV flame detector, designed for
the detection of non-organic based fires such as hydrogen and
metals as well as organic based fires. The detector provides
flexibility with its numerous output modes, and advanced design
features ensure reliability and speed in the detection of such
Installation is simple! The detector is
easily installed with a stainless steel
mounting bracket; this can be rotated to
ensure optimum positioning of the detector
in relation to the potential fire source.
Angular markings allow the positioning
angles of the detector to be recorded for
As well as a 4 to 20 mA output and 3
relays, an optional RS 485 output is also
available, which can be multi-dropped to a
central location. This provides a number
of options for detector monitoring and the
triggering of the necessary control action
upon the detection of a fire.
Automatic and manual optics checks
Automatic checks of the detector electronics
and optics ensure no fault goes
undetected. Additionally the test can be
triggered manually at anytime.
Isolated 4 to 20 mA as standard
Complete flexibility enables the detector
to be operated from a separate power
supply (as a 4 wire device) or as a 3 wire
device where there is no requirement for
an isolated output.
Easily visible status LED
A tri-coloured LED which is visible at the
front of the detector provides a simple
status indication to personnel in close
proximity to the detector. Green indicates
normal operation; yellow indicates a
fault and red indicates the presence of
The Drager Flame 1700 can be used
worldwide with the following approvals:
ATEX, IECEx, FM and CSA.
Dräger Flame 1700, Al housing, M20 entries 2350423
Dräger Flame 1700, Al housing, M25 entries 2350428
Dräger Flame 1700, Al housing, 1/2” NPT entries 2350434
Dräger Flame 1700, Al housing, 3/4” NPT entries 2350440
Dräger Flame 1700, SS housing, M20 entries 2350426
Dräger Flame 1700, SS housing, M25 entries 2350431
Dräger Flame 1700, SS housing, 1/2” NPT entries 2350437
Dräger Flame 1700, SS housing, 3/4” NPT entries 2350443
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
We are open Monday to Friday, from 9.30 - 5.30 GMT.
|Keison Global trading as:
Keison Products, VoIPon Solutions & 4Gon